MAC SERIES is a lush range of solid surfaces, which are manufactured using acrylic resin (PMMA-35% – 38%), natural minerals mainly Aluminium TriHydrate (ATH-58% – 61%), pigments and additives (4%). These surfaces are bendable and have non-porous quality. Generally, for vertical applications, 6 mm thick sheet is used. Usage of 12 mm thick acrylic solid sheet is preferred in horizontal load bearing sections, or where active heat source is available.

MAINTENANCE:

1. Everyday Care Clean your solid surfaces with a damp cloth or sponge. In areas of hard water, make sure to dry with soft cloth or paper towels to avoid spotting.

2. Basic Stains Use household glass cleaner or commercially available ammonia based products.

3. Preventing Damage Minor damage that may accidentally occur is most often repairable by our certified fabricator/installer or repair expert. However, be sure to follow these guidelines to prevent damage to your solid surface.

Heat: The solid surfaces have excellent heat resistant properties, but placing hot pans and other heat-generating appliances can damage the surface. Always use rubber pads to protect against extreme temperatures.

Chemicals: Strong chemicals, paint removers and oven cleaners can harm your solid surface. If exposed, the surface should be flushed with water.

Scratches: Never cut or chop directly on a solid surface, always use a cutting / chopping board.

Fractures: Avoid standing on counter tops or dropping heavy objects on the surface.